Specifications

E-13
ENGLISH
XL-UR27H
2008/June/26 XL-UR27H2008/June/26 XL-UR27H
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc (continued)
To remove the discs:
In the stop mode, open the disc compartment.
To pause playback:
Press the / (CD / ) button.
To stop playback:
Press the (CD ) button.
Caution:
 Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
 If a disc is damaged, dirty, or loaded upside down, “NO DISC” or
“CAN’T RD” will appear on the display.
 Keep foreign objects out of the disc compartment.
 Subjecting the unit to shock or vibration may cause mistracking.
 When the unit is not being used, be sure to close the disc
compartment. If it is left open, the lens may be covered with dust
and the unit may not operate properly.
 If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
 Various disc functions
Notes for CD or MP3/WMA disc:
Function Main unit Remote
control
Operation
Play Press in the stop
mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Function Main unit Remote
control
Operation
Track up/
Track down
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
Fast
forward/
Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
 When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
 Rewritable multi-session discs with unfinished writing, can still be
played.
 When a disc (CD, WMA or MP3) is input, “TOC READING” will be
displayed for several seconds depending on the number of files in
the disc. If this indication is displayed for an indefinite period of
time due to unspecified file being played or external noise etc.,
switch off the main AC power supply and then switch it on again.