Specifications

E-10
ENGLISH
8
XL-UR27H
2008/June/10 XL-UR27H
Basic Operation
General control (continued)
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
 Extra bass control (X-BASS)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control .
 Bass control
1. Press the BASS/TREBLE button to select “BASS”.
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.
 Treble control
1. Press the BASS/TREBLE button to select “TREBLE”.
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
treble.
 Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
Setting the clock (Remote Control
only)
In this example, the clock is set for the 24-hour (0:00) display.
Continued to the next page
30 MAXMIN
.....
-3 +3
-3 +3
CD TUNER
USBAUDIO IN
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Press the or button to select “TIME ADJ”, and press
the MEMORY button.
4 Press the or button to select 24-hour or 12-hour
display and then press the MEMORY button.
“0:00” The 24-hour display will appear.
(0:00 - 23:59)
“AM 12:00”
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
“AM 0:00” The 12-hour display will appear.
(AM 0:00 - PM 11:59)