Specifications

05/1/14 XL-MP40H(H)E2.fm
E-19
ENGLISH
TINSZA040SJZZ
XL-MP40H
Tape Recording
Recording on a cassette tape (continued)
To perform programmed recording:
To stop recording:
Press the button.
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the button.
! Recording from the radio
To stop recording:
Press the button.
To interrupt recording:
Press the button.
To resume recording, press the ( ) button.
Beat cancel
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
Notes:
"
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
"
If you use the remote control, make sure to press the SHIFT but-
ton prior to pressing the button.
! Erasing recorded tapes
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the button.
1 Programme tracks (see page 14).
2 Press the button.
3 Press the ( ) button to start recording.
1
Tune in to the desired station (see page 15).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the button.
Recording will be paused.
4
Press the ( ) button to start recording.
1 Press the button to pause recording.
2 Press the button and select "TP REC A" or "TP REC B" for
better reception.
1 Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2 Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3 Press the button.
4 Press the ( ) button to start erasing.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals