Operating instructions

DECALS

DECAL PLACEMENT

9405

9-22-04

GENERAL INFORMATION

The diagram on this page shows the location of the decals used on the

BRADCO Cold Planers. The decals are identified by their part numbers, with

reductions of the actual decals located on the following pages. Use this informa-

tion to order replacements for lost or damaged decals. Be sure to read all decals

before operating the attachment. They contain information you need to know for

both safety and product longevity.

SERIAL NUMBER

TAG LOCATION

#40151

MODEL NUMBER

#40149

#40113

IMPORTANT: Keep all safety signs clean and legible. Replace all missing,

illegible, or damaged safety signs. When replacing parts with safety signs at-

tached, the safety signs must also be replaced.

REPLACING SAFETY SIGNS: Clean the area of application with nonflammable

solvent, then wash the same area with soap and water. Allow the surface to fully

dry. Remove the backing from the safety sign, exposing the adhesive surface.

Apply the safety sign to the position shown in the diagram above and smooth out

any bubbles.

#40149

#40161

#40719

#4468

#40161

#40118

#40723

#40722

OPERATION CONTROLS

MODEL NUMBER