Operating instructions

TO THE OWNER
A
A
8915
3-5-03
GENERAL COMMENTS
Congratulations on the purchase of your new BRADCO product! This
product was carefully designed and manufactured to give you years of dependable
service. Only minor maintenance (such as cleaning and lubricating) is required to
keep it in top working condition. Be sure to observe all safety precautions and
maintenance procedures, as described in this manual.
ABOUT THIS MANUAL
This manual has been designed to help you do a better, safer job. Read this
manual carefully and become familiar with its contents. Remember, never let
anyone operate this unit without reading the "Safety Precautions" and
"Operating Instructions" sections of this manual. (See Sections B and G
respectively.)
Unless noted otherwise, right and left sides are determined from the position
of the operator when behind the product facing forward.
SAFETY ALERT SYMBOL
This is the "Safety Alert Symbol" used by this industry. This symbol is
used to warn of possible injury. Be sure to read all warnings carefully.
They are included for your safety and for the safety of others working
with you.
SERVICE
When servicing your product, remember to use only manufacturer replace-
ment parts. Substitute parts may not meet the standards required for safe, depend-
able operation.
To facilitate parts ordering, record the model and serial number of your unit in
the space provided on this page. This information may be obtained from the identi-
fication plate located on the product.
MODEL____________________________________
SERIAL NUMBER___________________________
DATE PURCHASED_________________________
The parts department needs this information to insure that you receive the
correct parts for your specific model.