HI FI-KOMPONENTEN-SYSTEM SYSTÈME HI FI SISTEMA HI FI COMPONENTE HI FI KOMPONENT SYSTEM HI FI SISTEMI HI FI SYSTEEM SISTEMA DE COMPONENTE HI FI HI FI-KOMPONENTTIJÄRJESTELMÄ HI FI COMPONENT SYSTEM BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI MODELL MODÈLE MODELO MODELL MODELLO MODEL MODELO MALLI MODEL XL-HF300PH(S) GEBRUIKSAANWIJZING MANUAL DE OPERAÇÃO KÄYTTÖOHJE OPERATION MANUAL iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc.
BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS ERITYISHUOMAUTUS SPECIAL NOTES ● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY, all’interno dell’apparecchio c’è ancora la corrente. Se il tasto ON/STAND-BY si trova nella posizione STAND-BY, l’unità può essere accesa con il modo timer o con il telecomando. Avvertenza: L’apparecchio non contiene parti riparabili dall’utente.
● Vorsicht: ● DENNA APPARAT ÄR ANSLUTEN TILL 230 V VÄXELSTRÖM NÄR STICKPROPPEN ÄR INSKJUTEN I VÄGGUTTAGET. FÖR ATT FULLSTÄNDIGT KOPPLA IFRÅN APPARATEN, V.G. DRAG UT STICKPROPPEN. ● ● Audio-visuelles ● ● ● ● ● ● ● ● Material kann Urheberrechte umfassen, die ohne Genehmigung des Eigentümers dieser Urheberrechte nicht aufgenommen werden dürfen. Siehe die entsprechenden nationalen Gesetze.
● VORSICHT ● Advarsel: Til at forbygge ild og stød risiko, lad vaere med at undsaette denne indretning for drypning eller overstaenkning. Der må ikke anbringes nogen genstande fyldt med vand, som for eksempel vaser, på dette apparat. Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen.
Eigenschaften der Laserdiode Material: AIGaAs Wellenlänge: 790 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0.7 mW ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE INSTRUMENTER. VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ OPTISEN LAITTEEN LÄPI. VARNING-SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
“Made for iPod” e “Made for iPhone” significano che un accessorio elettronico è stato progettato per essere specificamente collegato iPod o iPhone, rispettivamente; inoltre, il produttore ne ha certificato la conformità agli standard di funzionamento Apple. Apple non si ritiene responsabile circa il funzionamento del presente dispositivo o la sua conformità con gli standard normativi e relativi alla sicurezza. Entsorgungsinformationen A. Entsorgungsinformationen für Benutzer aus Privathaushalten 1.
Información sobre la eliminación Informazioni per un corretto smaltimento A. Información sobre eliminación para usuarios particulares 1. En la Unión Europea A. Informazioni sullo smaltimento per gli utenti (privati) 1.
Informação sobre Eliminação de Produtos Information on Proper Disposal Informações sobre a Eliminação de Produtos para os Utilizadores (particulares) 1. Na União Europeia Atenção: Se quiser eliminar este equipamento, não o deve fazer juntamente com o lixo doméstico comum! O equipamento eléctrico e electrónico deve ser tratado separadamente e ao abrigo da legislação aplicável que obriga a um tratamento, recuperação e reciclagem adequados de equipamentos eléctricos e electrónicos usados.
Informationen zur Batterieentsorgung Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei enthalten. Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien, welche eine ordnungsgemäße Behandlung und Verwertung entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten erhalten Sie von IhrerGemeindeverwaltung.
ENGLISH ● XL-HF300PH(S) Hi Fi Component System consisting of XL-HF300PH(S) (main unit) and CP-HF300H (speaker system). Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.
Precautions ■ General ● Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") 10 cm (4") ● Use the unit on a firm, level surface free from vibration. ● Place the speakers at least 30 cm (12") away from any CRT TV to avoid colour variations across the TV screen. If the variations persist, move the speakers further away from the TV.
Controls and indicators (continued) ■ 1 19 20 21 22 23 24 25 27 29 31 32 33 34 35 36 6 7 8 9 10 11 12 13 14 15 9 1 23 4 5 17 18 19 20 21 ■ 1. 2. 3. 4. ■ Page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5 2. On/Stand-by Button . . . . . . . . . . . . . . . . . 6, 8, 9, 18 3. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . 14, 15 4. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . 15 5. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System connections Make sure to unplug the AC power lead before making any connections.
System connections (continued) ■ Remote control ■ Using other subwoofer You can connect a subwoofer with an amplifier to the SUBWOOFER PRE OUT socket. Audio cable (commercially available) Commercially available subwoofer (amplifier built in) Battery installation 1 Open the battery cover. 2 Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the (–) battery terminals. 3 Close the cover.
General control ■ X-Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the X-BASS button on the remote control. Volume Illuminator ■ Bass control 1 Press the BASS/TREBLE button to select “BASS”. 2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass. ■ Treble control 1 Press the BASS/TREBLE button to select “TREBLE”.
Setting the clock (Remote control only) (continued) ■ 5 To adjust the hour, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 To adjust the minutes, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 minute. To confirm the time display: Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.
Listening to the iPod or iPhone (continued) Watching videos on a TV connected to iPod or iPhone ■ 1 Press the DISPLAY (TV OUT) button for more than 2 seconds. “TV Display” will appear on display. 2 Press the ENTER button to start playback. ■ iPhone playback ● Sound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds. ● Incoming calls will pause the playback and iPhone ringtones will be heard from the main unit speakers only.
Listening to a CD or MP3/WMA disc Disc playback ■ 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the disc on the disc tray, label side up. 5 Press the OPEN/CLOSE button to close the disc tray. 6 Press the / (CD/USB / ) button to start playback. After the last track is played, the unit will stop automatically.
Advanced CD or MP3/WMA disc playback ■ Random play The tracks on the disc can be played in random order automatically. To random play all tracks: Press and hold down PLAY MODE button on the remote control until “Random” appears. Press the / (CD/USB / ) button. To cancel random play: Press the PLAY MODE button until “RDM” indicator disappears. ■ Direct track search By using the Numeric buttons, the desired tracks on the current disc can be played.
Advanced CD or MP3/WMA disc playback (continued) ■ MP3/WMA folder mode (only for MP3/ WMA files) Programmed play (MP3/WMA) 1 Whilst in the stop mode, press the MEMORY button to enter the programming save mode. 2 Press the PRESET ( or ) button on the remote control to select the desired folder. Then press the or button on the remote control to select the desired tracks. 3 Press the MEMORY button to save the folder and track number.
MP3/WMA folder mode (only for MP3/ WMA files) (continued) Listening to USB mass storage device/MP3 player Procedure to playback MP3/WMA disc with folder mode on ■ To play back CD-R/RW. 1 Press the CD button, and load an MP3/WMA disc. Press the FOLDER button and disc info will be displayed. MP3 indicator WMA indicator TOTAL Note: This product is not compatible with MTP and AAC file systems from USB mass storage device or MP3 player.
Listening to USB mass storage device/MP3 player (continued) To play back USB/MP3 player with folder mode on ■ 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder.
Listening to the radio ■ Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in “Tuning”. 2 Press the MEMORY button. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that station in memory.
Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc. When tuned to an RDS station, “RDS” and the station name will be displayed.
Using the Radio Data System (RDS) (continued) ■ Notes for RDS operation ■ If any of the following events occur, it does not mean that the unit is faulty: ● “PS”, “No PS” and a station name appear alternately, and the unit does not operate properly. ● If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. ● When you receive an RDS station whose signal is too weak, information like the station name may not be displayed.
Using the Radio Data System (RDS) (continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) You can search for and receive the following PTY, TP and TA signals. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL Short accounts of facts, events and publicly expressed views, reportage and actuality.
Timer and sleep operation (Remote control only) ■ Timer playback Before setting timer: ● Check that the clock is set to the correct time (refer to page 6). If it is not set, you cannot use the timer function. ● For timer playback: Plug in USB or load discs or dock iPod to be played. 1 Press the ON/STAND-BY button to turn the power on. 2 Press and hold the CLOCK/TIMER button. Timer playback: The unit turns on and plays the desired source (CD, TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time.
Timer and sleep operation (Remote control only) (continued) 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer operates at the same time every day. It will continue until the daily timer setting is cancelled. Cancel the daily timer when it is not in use. ■ Sleep operation The radio, compact disc, iPod, USB, Audio In and Line In can all be turned off automatically.
Enhancing your system Troubleshooting chart The connection lead is not included. Purchase a commercially available lead as shown below. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. ■ General Symptom Portable audio player, etc. ● The clock is not set to the correct time. ● Did a power failure occur? Reset the clock.
Troubleshooting chart (continued) ■ If such a problem occurs, do the following: USB Symptom ● Device cannot be detected. 1 Set the unit to the stand-by mode and turn the power on ● ● ● ● ● Playback does not start. ● Wrong time display. ● Wrong file name display. ■ ● ● ● ● 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ■ General Power source AC 220 - 240 V ~ 50/60 Hz Power consumption Power on: 40 W Power stand-by: 0.
TINSZA732AWZZ Downloaded From Disc-Player.
UP XL-HF300PH(S) HI FI COMPONENT SYSTEM Downloaded From Disc-Player.
