Specifications

XL-DV75HMKII_EN_7pt.fm
34
2009November 24
8
7
6
5
4
3
2
1
Maintenance
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
Specifications (continued)
Cleaning the cabinet
General
Power source AC 220 - 240 V ~, 50/60 Hz
Power
consumption
Power on: 35 W
Power stand-by: 0.4 W(*)
Dimensions Width: 175 mm
Height: 138 mm
Depth: 225 mm
Weight 2.2 kg
( * ) This power consumption value is obtained when the
main unit is in stand-by mode.
Amplifier
Output power MPO: 40 W (20 W + 20 W)
(10% T.H.D.)
RMS: 30 W (15 W + 15 W)
(10% T.H.D.)
Output
terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
DVD player
Signal system PAL/NTSC colour
Supported disc
types
DVD (with the same region number
on the back of the unit), SVCD, VCD,
audio CD, CD-R, CD-RW, JPEG,
DivX (version 3.0 ~ 6.0)
Video signal Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal Frequency
characteristic
Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate:
48 kHz)
20 Hz to 20 kHz
(sampling rate:
96 kHz)
CD: 20 Hz to 20 kHz
S/N radio CD: 94 dB (1 kHz)
Dynamic
range
Linear PCM DVD:
95 dB
CD: 94 dB
To tal
harmonic
distortion
ratio
0.01% maximum
Tuner
Frequency
range
FM: 87.5 - 108 MHz
Speaker
Type 1-way type speaker system
10 cm Full range
Maximum input
power
30 W
Rated input
power
15 W
Impedance 6 ohms
Dimensions Width: 130 mm
Height: 170 mm
Depth: 210 mm
Weight 1.56 kg/each