Specifications

E-40
When the timer end time is reached, the system will enter the
power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected day. It will
continue until the daily timer setting is cancelled. Cancel the daily
timer when it is not in use.
Notes:
When performing timer playback using another unit connected to
the USB 2, AUDIO IN, LINE IN or DIGITAL IN socket select “ USB-2
(iPod) ” or “AUDIO IN” or “LINE IN” or “DIGITAL IN” in step 5.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn on or off.
To stop the timer playback, follow step “Cancelling the timer
setting” of this page.
Checking the timer setting:
Turn the power on and press and hold down the CLOCK/TIMER
button.
Within 10 seconds, press the or button to select “Once” or
“Daily”, and press the ENTER button.
Within 10 seconds, press the or button to select “Timer
Call”, and press the ENTER button.
Cancelling the timer setting:
Turn the power on and press and hold down the CLOCK/TIMER
button.
Within 10 seconds, press the or button to select “Once” or
“Daily”, and press the ENTER button.
Within 10 seconds, press the or button to select “Timer Off”,
and press the ENTER button. Timer will be cancelled (the setting
will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
Turn the power on and press and hold down the CLOCK/TIMER
button.
Within 10 seconds, press the or button to select “Once” or
“Daily”, and press the ENTER button.
Within 10 seconds, press the or button to select “Timer On”
, and press the ENTER button.
Press the ON/STAND-BY button to enter the power stand-by
mode.
3�
●
●
�
2�
3�
�
2�
3�
�
2�
3�
4�
Sleep operation■
The radio, disc, iPod, USB, Audio In, Line In, TV (ARC) and Digital In
can all be turned off automatically.
Play back the desired sound source.
Press the SLEEP button.
Within 5 seconds, press the Numeric button to set the time.
(1 minute ~ 99 minutes)
“SLEEP” will appear.
The unit will enter the power stand-by mode automatically after the
preset time has elapsed. The volume will be turned down 1 minute
before the sleep operation nishes.
To conrm the remaining sleep time:
Whilst “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated. To
cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Whilst “SLEEP” is indicated, press the SLEEP button.
Within 5 seconds, press the “0” button twice until “SLEEP 00”
appears.
To use timer and sleep operation together■
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up to
iPod in the next morning.
Set the sleep time (see above, steps 1 - 5).
Whilst the sleep timer is set, set the timer playback (steps 2 - 9,
page 39).
Sleep timer
setting
Timer playback
setting
End
time
1-99 minutes Desired time
Sleep operation will
automatically stop
Timer playback
start time
�
2�
3�
4�
5�
�
�
2�
�
2�
The connection lead is not included. Purchase a commercially
available lead as shown below.
Portable audio
unit, etc.
Audio cable (not supplied)
Listening to the playback sounds of portable audio
unit, etc.
■
Use a connection lead to connect the portable audio unit etc. to
the AUDIO IN socket. When using video equipment, connect the
audio output to this unit and the video output to a television.
Press the ON/STAND-BY button to turn the power on.
Press the INPUT button on the remote control or SELECTOR
button repeatedly on main unit to select AUDIO IN function.
Play the connected equipment. If volume level of the connected
device is too high, sound distortion may occur. Should this happen,
lower the volume of the connected device. If volume level is too
low, increase the volume of the connected device.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones■
Do not turn the volume on to full at switch on and listen to music
at moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Before plugging in or unplugging the headphone, reduce the
volume.
Be sure your headphone has a 3.5 mm (1/8”) diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphone disconnects the speakers automatically.
Adjust the volume using the VOLUME control.
�
2�
3�
4�
●
●
●
●
Timer and sleep operation (Remote control only) (continued)
Enhancing your system