Specifications

E-3
Before using the USB memory device
Caution:
Do not remove the USB memory device or unplug the AC power
lead while the operations for “USB Memory Management” or
“Software Update Settings (Manual Update from USB memory
device)” are being performed.
Do not use a USB extension cable when connecting a USB
memory device to the USB1 terminal.
Using a USB extension cable may prevent the unit from
performing correctly.
Notes:
SHARP cannot guarantee that all brands’ USB memory devices
will operate with this unit.
Only USB memory devices formatted with FAT 32/16 are
compatible.
When formatting a USB memory device using a PC, perform the
following settings.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size
USB Memory Management■
The following instructions explain how to delete data such as the
Virtual Package data and the BD-LIVE data in a USB memory
device.
When you insert or remove a USB memory device, be sure to turn
the main power off and make sure that “Quick Start” is set to “No”
(See page 28).
Insert the USB memory device into the USB terminal on this unit.
●
●
–
●
●
�
Note:
A USB memory device can be used only with USB1 terminal.
Rear
USB1 terminal
USB memory device
Press ON/STAND-BY to turn on the power.
Press / to select “Settings”, then press or ENTER.
Press / to select “USB Memory Management”, then press
or ENTER.
The “USB Memory Management” screen is displayed.
“No USB Memory” appears when no USB memory is
inserted.
Press / to select “Erase” or “Format”, then press ENTER.
Erase: Deletes only BD-VIDEO data written on the USB memory
device such as BD-LIVE data.
Format: Be aware that all data including BD-VIDEO data and
software update data will be deleted.
If you want to delete only the unneeded software update data
after the software is updated, delete the data on the USB
memory device using a PC.
Erases BD-VIDEO data on USB memory.
Erase all contents on USB memory
including protected contents.
Format
Erase
Press / to select “Yes”, then press ENTER.
A conrmation message is displayed. Check that the correct
USB memory device is displayed, and then continue.
Start the process.
The screen for the current operation will display.
OK
Complete
●
2�
3�
4�
●
●
5�
●
6�
●
7�
●
Press ENTER.
Press HOME or EXIT to exit.
Note:
Data which has been saved to the unit’s internal memory (game
score, etc.) will also be deleted.
Software Update Settings■
In this unit, the software version can be updated using either one of
the following methods.
Auto Update from Network
Manual Update from Network
Manual Update from USB memory device
Auto Update from Network
This function allows you to perform the update by accessing an
Internet connection automatically to check if there is a new rmware
version every time the unit is turned on.
When using this function, it is required to perform the following
settings in advance.
Notes:
Make sure that the LAN cable is connected to this unit.
Make sure to perform the communication settings. (See pages 29
–30.)
It may take time to access and download the update depending
on the Internet connection and other factors.
Caution:
Do not remove the LAN cable or unplug the AC power lead while
downloading or updating software.
Setup
Press / to select “Settings”, then press or ENTER.
Press / to select “Software Update Settings”, then press
or ENTER.
Press / to select “Auto Update Setting”, then press or
ENTER.
Press / to select “Yes”, then press ENTER.
After this, an Internet connection will be made automatically
every time this unit is turned on.
8�
9�
●
●
●
●
●
●
●
�
2�
3�
4�
●
Settings (continued)