Specifications

E-30
The operation procedure for inputting characters manually
Note:
Numeric characters such as IP address can be entered on the input
screen either by selecting each of the characters in the “Numeric”
mode or using the Number buttons on the remote control.
IP Address
Netmask
Gateway
123
Press ENTER at the boxes in which characters are to be entered,
and the input screen will appear.
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Selected by pressing /
Selected by pressing /
●
�
Press / to select the desired input mode.
Press / to select a number/character, then press ENTER.
Repeat the step 3 to display all of the desired characters/numbers
in the input eld.
Example: The screen for inputting numeric characters
Numeric
123
1 2 3 4 5 6 7 8 9 0
Edit
Notes:
Press nRETURN/DEMO (Del.Char.) to delete a number/
character you have input.
To change a number/character you have input, press B (Green)
(Left) or C (Yellow) (Right) to select the number/character you want
to change, and press nRETURN/DEMO (Del.Char.). Then, press
/ to select a new number/character you want to input, and press
ENTER.
2�
3�
4�
●
●
Press D (Blue) (Complete) to x the numbers which have been
input.
IP Address
Netmask
Gateway
123
Repeat step 1 to 5 to nish inputting all the required characters.
5�
6�
Settings (continued)
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel Left Right Complete Del.Char.
The same operation as the coloured buttons and nRETURN/DEMO can be performed by
selecting each of the items and pressing ENTER.
“Del.Char.” stands for deleting characters.