Operation Manual

8
5. Once the device is connected with each other, a short
acoustic signal will sound and the “Connected” will
appear instead of the “UNCONNECT” on the display.
6. Now you can enjoy the music from your device.
7. To turn o the Bluetooth function, switch to another function on the
Micro system, or disable the function on your Bluetooth device.
Connect other audio devices
Audio allows your unit quickly and easily to connect to an MP3 player or
other external sources.
1. Use a 3.5mm audio cable to connect your external audio
device to the AUX IN socket on the front panel.
2. Connect the Micro System mains plug to the power supply.
3. Press the SOURCE button to switch to the AUDIO mode.
4. You may need to operate the external audio
device directly for playback features.
5. For optimum volume levels, adjust the volume
on the external audio device.
USB Operation
It is possible to listen to the music using the USB device interface of the
unit.
Connecting a USB device:
1. Switch the unit on and select USB mode by
pressing the SOURCE button.
2. Connect the USB device to the USB connection
socket on the front panel of the unit.
3. The radio will now play songs which are saved on the USB device.
Notes:
 MP3 and WAV formats are supported.
 Unsupported  le formats are skipped. For example, Word documents
(.doc) or MP3  les with extension .dlf are ignored and not played
 Even when the  les are in a supported format (MP3), some
may not play or display depending on the compatibility.
 In some case, reading may be as long as 60
seconds, this is not a malfunction.
 Depending on the amount of data and media speed, it
may take longer for the unit to read the USB device.
 The maximum USB memory size is 64GB.
 USB memory device must be formatted in FAT, FAT16 or FAT32
Troubleshooting
No Power
Reason
• Power cable not connected to wall socket
• Power socket is not switched on
Solution
• Make sure the plug is connected
• Switch the power on
No Sound CD/AUX/RADIO
No Sound from AUX input
Reason
• Volume is too low
• AUX source volume is too low
Solution
• Increase the volume
• Increase the output volume of the AUX source
Sound is distorted
Sound is distorted from AUX Input
Reason
• Volume is too high
• AUX source volume is too high
Solution
• Reduce the volume
• Reduce the output volume of the AUX source
Unable to play CD
Reason
• No disc in the tray
• Disc not loaded properly
• Disc is dirty
Solution
• Insert a compatible disc
• Check the disc loaded
• Clean the disc
Static Sound
Reason
• Poor reception
Solution
• Re-locate the antenna (FM)
Desired station not found
Reason
• Weak signal
• Station not available in your area
Solution
• Use the manual tune function
• See DAB availability website
Weak or no DAB signal
Reason
• DAB not available in your area
Solution
• See DAB availability website
I can hear a burbling noise on some stations
Reason
• Weak or no DAB signal
Solution
• Try re-positioning the aerial (earphones)
Unit switches o after 10 minutes of inactivity
Reason
• Auto standby mode in operation
Solution
• This unit is designed to enter STANDBY mode automatically after 10
minutes of inactivity. Press the STANDBY button to wake up the unit.