Operation Manual

CASSETTE OPERATION
■ Cassette tape
● For playback, use normal or low-noise tape for
the best sound. (Metal or CrO2 tape is not rec-
ommended.)
For recording, use only normal tape.
● Do not use C-120 tapes, tapes with large di-
ameter reels, or poor-quality tapes, as they
may cause malfunctions.
● Before loading a tape into the cassette com-
partment, tighten the slack with a pen or pencil.
● Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the
tab holes with adhesive tape to erase or record
again.
■ Tape playback
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the FUNCTION button until "TP" ap-
pears in the display.
● Press the TAPE button on the remote control.
3 Open the cassette door by pushing the area
marked " PUSH EJECT".
4 Load the cassette into the cassette compart-
ment.
5 Press the button.
To stop playback:
Press the ■ button.
Fast forward/rewind:
To advance the tape, press the ■ button, then
press the button. To rewind, press the ■ but-
ton, then press the button.
Caution:
● When removing the cassette tape, press the
■ button, and then open the cassette compart-
ment.
● Before changing from one tape operation to
another, press the ■ button.
● If a power failure occurs during tape operation,
the tape head will remain engaged with the
tape and the cassette door will not open. In
this case, wait until power is restored.
● Even if the button is pressed during tape
playback, the unit will not enter the pause
mode.
Side A (1)
Tab for side B (2)
Tab for side A (1)
1
2
5
1
5
2
4
3
XL-530E(SUK) TINSE0017SJZZ
10