Quick Start Manual

Printed in Japan
TINS-6787CEZZ
9P08-JWG
VIDEO Mode
E. Connecting to a Video Source (VCR,
Laser Disc Player, DTV Decoder or DVD
Player) Using the Standard Video Input
1 Connect the yellow RCA connectors to the corresponding yellow
VIDEO INPUT terminal on the projector and the Video output
terminal on the video source.
2 To use the built-in audio system, connect the red and white
RCA connectors to the corresponding red and white AUDIO
INPUT terminals on the projector and the Audio output terminals
on the video source.
VCR
or
Laser disc player
To video output terminal
To S-video output terminal
Video cable (sold separately)
To audio output terminals
Audio cable
(sold separately)
S-video cable (sold separately)
Use this terminal when the audio-
visual equipment to be
connected has an S-VIDEO
output terminal.
INPUT 2 Mode
INPUT 1 Mode
F. Selecting and Checking the Input Mode
1 Press INPUT to select the desired input mode.
INPUT button
2 Press INPUT again to change the mode.
EXAMPLE
H. Digital Keystone Correction
1 Press KEYSTONE.
2 Press ∂ to compress the upper part of the image.
Press ƒ to compress the lower part of the image.
3 Press ENTER to display a test pattern.
4 Press ENTER to clear the test pattern.
5 To exit, press KEYSTONE.
6 To reset, press UNDO.
1, 5
3, 4
2
6
g
4
Test Pattern3
• Straight lines or the edges of the displayed image may become jagged.
I. Turning the Projector Power off
1 Press POWER OFF.
Power OFF
button
2 Press POWER OFF again while the message is displayed.
G. Adjusting the Lens
1 Rotate the zoom ring. The image can be adjusted to the desired
size within the zoom range.
2 Rotate the focus ring until the image on the screen becomes
clear.
1
2
PDF operation manuals in several languages are included in the CD-ROM. See “How to Access the PDF Operation
Manuals” in the operation manual of the projector for more details.
XG-NV7XU/QR (E) 99.11.8, 2:07 PM2