Quick Start Manual

COMPUTER INPUT 1 COMPUTER INPUT 2 VIDEO INPUT
XG-NV5XB/QR(E-2)
4. Connecting Video Equipment 6. Turning the Projector Power off
5.
Selecting and Checking the Input Mode
(VCR, DVD Player, Laser Disc Player)
MAIN POWER Switch
To video
output
terminal
To S-video
output
terminal
To audio
output
terminals
Use this terminal when the audio-
visual equipment to be connected
has an S-VIDEO output terminal.
ON
MUTE
TOOLS
R-CLICK ENTER
INPUT
MOUSE
LIGHT
ADJ.
IrCOM
FREEZE
AUTO SYNC
KEYSTONE ENLARGE
MENU
LASER
BLACK
SCREEN
VOL
OFF
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
TOOLS
R-CLICK ENTER
INPUT
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
IrCOM
FREEZE
AUTO SYNC
KEYSTONE ENLARGE
MENU
LASER
BLACK
SCREEN
Printed in Japan
TINS-6598CEN1
T2054-A
9P07-JWG
1. Connect the yellow (Video) RCA connector to the corresponding
yellow terminals on the projector and video source.
2. Connect the red and white (Audio) RCA connectors to the
corresponding red and white terminals on the projector and
video source.
3. Wait until the projector fan turns off, then press the MAIN
POWER switch.
2. Press the POWER OFF button again while the following screen
is displayed.
1. Press the POWER OFF button on the projector or on the
“Power” remote control.
1. Press the INPUT SELECT button on the projector or on the
“Power” remote control to select the desired input mode.
2. Press the INPUT SELECT button again to change the mode as
shown below.
POWER OFF
button
• For better quality video, the S-video connection can be used.
INPUT
SELECT
button
PDF operation manuals in several languages are included in the CD-ROM. See “How to Access
the PDF Operation Manuals” in the operation manual of the projector for more details.