Service manual

XG-XV1 E/A
Location of Controls
FRONT VIEW
POWER ON/OFF button
Remote sensor
POWER indicator
LAMP REPLACEMENT
indicator
TEMP. (+--t-- TEfE;E;ATURE WARNING
Carrying handle
Cautions:
Lamp cage cover
(Natural ventilation)
l The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during
projector operation. To prevent injury, do not touch these areas until they have sufficiently
Cooling fan
(Intake vent)
cooled.
l Allow at least 10 cm of space between the cooling fan (exhaust vent) and the other nearest
wall or obstruction.
l If the cooling fan becomes obstructed, a protection device will automatically turn off the
projector lamp. This does not indicate a malfunction. Remove the projector plug from the
wall outlet and wait 10 minutes. Then turn on the power by plugging the cord back in. This
will return the projector to its normal mode.
OPERATION PANEL ON SIDE OF PROJECTOR
- RI ACK
. -.
1
MENU ENTER
/A\
lNPl,T :
LENS SCREEN MUTE
VOLUME
SELECT
I
I
MENU
ADJUSTMENT
button
(41, ,WA) buttons
ENTER button
LENS button IvlUTE button
INPUT SELECT
button
SIDE AND REAR VIEW
Note: * (for XG-XV1 A as well as
Australian and NewZealand versions of XG-XV1 E)
* COMPOSITE
VIDEO INPUT 1
Video: BNC
Audio: RCA
* S-VIDEO INPUT
(4-pin mini DIN)
COMPOSITE
* VIDEO INPUT 2
Video: BNC
Audio: RCA
MAIN POWER
switch
* COMPOSITE VI
onal computer with the
I.
IBM/Mac)
(for NEC in JAPAN)
WIRED REMOTE
CONTROL INPUT
(3.5 mm Mono Minijack)
COMPUTER AUDIO INPU
(3.5 mm Stereo Minijack)
AUDIO OUTPUT: RCA
DC 5V 1A OUTPUT
INPUT 2: BNC
IDE0 OUTPUT: BNC
(R, G, B, H(C)-SYNC, V-SYNC)
COMPUTER RGB OUTPUT connector (HD-15)
Notes:
* The DC 5V OUTPUT jack cannot supply a current of more than IA.
l When connecting a Macintosh Series computer that outputs C-SYNC, connect the cable to the COMPUTER RGB 2 INPUT
H-SYNC input terminal.
4