Service manual
1
XG-XVlE/A
/
Adjusting point
/
-
1
Adjusting conditions
Adjusting procedure
24 Audio system
l
In the process mode, select L3. Check the bass,
tre-
performance
ble
and balance.
check
25
RGB
performance
check
26 Off-timer
performance
check
27
Lens shift
adjustment
1.
Receive the RGB signal.
1.
Group
:
LENS
Subject
:
LENS AUTO
l
In the process mode, select L4. Check the picture,
brightness, red, blue, clock, phase, horizontal
posi-
tion, and vertical position.
l
In the process mode, select OFF. Make sure that the
off-timer starts with
“5”
(minutes), counts down each
minute in 1 second, and turns off the set at
“0”.
l
Adjust the lens center position (for the lens center to
come to the
n
mark on the front cabinet).
l
When the ENTER key is pressed after choosing the
subject LENS AUTO, the data is fed automatically.
28 Factory settings
l
Execute
S4
of the group SSS to make the factory
settings.
26