Operation Manual
Table Of Contents
- Introduction
- Easy Start
- Setup
- Connections
- Basic Operation
- Useful Features
- Operating with the Remote Control
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Audio Adjustment (“Audio” Menu)
- Signal Adjustment (“SIG” Menu)
- Screen Adjustment (“SCR” Menu)
- Helpful Functions Set during Installation (“PRJ” menu)
- Setting Up the Projector Network Environment (“Net.” Menu)
- Viewing Stereoscopic 3D Images
- Appendix

38
Image Projection (Continued)
[For XG-SV100W]
COMPUTER
Main resolution NORMAL FULL NATIVE 16:9
4:3 aspect ratio
SVGA (800 × 600)
1068 × 800
1280 × 800
800 × 600
1280 × 720
XGA (1024 × 768) 1024 × 768
SXGA (1152 × 864) 1152 × 864
SXGA+ (1400 × 1050) 1400 × 1050
Other aspect ratios
SXGA (1280 × 1024) 1000 × 800 1280 × 1024
1280 × 720 1280 × 720 —
—1360 × 768 1280 × 722 1360 × 768
1366 × 768 1280 × 720 1366 × 768
1280 × 768 1280 × 768
— 1280 × 720
1280 × 800 1280 × 800 —
Input signal Output screen image
Computer Image type NORMAL FULL NATIVE 16:9
Resolution
XGA and below
4:3 aspect ratio
Resolution
higher than
XGA
*2
SXGA
(1280 × 1024)
5:4 aspect ratio
1280 × 720
16:9 aspect ratio
—
*1
—
*1
1360 × 768
1366 × 768
16:9 aspect ratio
1280 × 768
15:9 aspect ratio
—
*1
1280 × 800
16:10 aspect ratio
—
*1
: Cutout area on which images cannot be projected
: Area where the signals are off screen
*1 Same as NORMAL mode.
*2 In case SXGA+ input.










