Specifications

Projector Driver Application Note
Sharp XG-P20XU
Revision B
DR-SHP17 – 9/04/02 SP Controls reserves the right to modify specifications without notice at any time.
This document describes the SmartPanel Projector Driver for the Sharp XG-P20XU projector. For
information on configuring and using the Panel see the SmartPanel Configuration and Installation Guide.
Please read the SPECIAL CONTROL NOTE in Section V of this document before attempting control of
the projector. This note describes how the Sharp’s configurable settings impact the projector’s behavior.
I. PROJECTOR CONTROL
A. Volume and Power Control
Volume control on the Sharp is absolute. Absolute volume control is also possible with SP Controls’
option Audio Follow Video Preamplifer.
B. Input Selection Mapping
The following table specifies the factory preset input mapping for this Driver. The Configuration Utility
can be used to customize these settings your installation.
Selection 1: INPUT 1 (Computer - VGA)
Selection 2: INPUT 2 (Computer/Video - 5
BNC)
Selection 3: INPUT 4 (Video - RCA)
Selection 4: INPUT 5 (Video - S-Video)
Input choices available for the Sharp with this
Driver are Input 1 (VGA), Input 2 (5 BNC), Input 3
(DVI), Input 4 (RCA), and Input 5 (S-Video)
C. Hidden Function Mapping
The following table specifies the factory preset hidden function mapping for this Driver. The
Configuration Utility can be used to customize these settings your installation.
Selection 1: BLACK SCREEN
Selection 2: ENTER
Selection 3: ADJUST LEFT
Selection 4: ADJUST RIGHT
Off: MENU
Volume Up: ADJUST UP
Volume Down: ADJUST DOWN
Hidden functions names are based on the Sharp remote and controls on top of the projector.
Hidden functions names are based on the Sharp remote, manual, and controls on top of the projector.
ADJUST controls, ENTER and UNDO navigate through onscreen menus. UNDO is a “return to previous
menu” or “back” command. MENU can also be used as UNDO.
BLACK SCREEN is a toggle. The area zoomed with the ENLARGE function can be moved using the
ADJUST keys
Projector
Ready
Warm-up
OFF
ON
Volume
VGA
BNC RCA S-VIDEO
Projector
Ready
Warm-up
OFF
ON
Volume
ADJUST
UP
ADJUST
DOWN
MENU
BLACK
SCREEN
ENTER
ADJUST
LEFT
ADJUST
RIGHT