Specifications
SmartPanel Projector Driver Application Note
Sharp XG-P20XU
© 2002 SP Controls Inc. 601 Minnesota Suite 115 San Francisco, CA 94107
help@spcontrols.com
3. You should set Economy Mode labeled Auto Power Off feature to OFF. If you leave this setting on,
the Sharp will automatically shut itself off when no signal is detected for several minutes. If you desire
automatic shutdown, use the Panel’s Automatic Shutdown Timer. See Application Note Section V.
Special Control Note for instructions.
4. Baudrate: The RS-232 port of the projector must be set to 9600 bps (which is the default projector
factory setting). See Application Note Section V. Special Control Note for instructions.