Instruction manual

E-27
Using the Black Screen Function
This projector is equipped with a Black Screen Function.
This function can be used to black out the presentation
image.
• Press the BLACK SCREEN button on the projector or the
remote control to display the black screen. Press the BLACK
SCREEN button again to return to the presentation image.
Note:
• When BLK SCRN DISP is set to OFF, the On-Screen Display (“BLACK
SCREEN”) will not appear during black screen. See below.
LCD Projector
Black Screen On-Screen Display override
The On-Screen Display (“BLACK SCREEN”) that appears
during black screen can be turned off. When BLK SCRN
DISP is set to OFF, the On-Screen Display will not appear
during black screen.
• Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.” Then press the ENTER button to display the IMAGE
ADJ. screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “BLK SCRN DISP” and press the ADJUST-
MENT ß/© buttons to select ON or OFF.
BLK SCRN DISP
IMAGE ADJ.
REVERSE
INVERT
INPUT DISPLAY
:SEL.
:ADJ.
:END
MENU
[
OFF
]
[
OFF
]
[
OFF
]
[
ON
]
On-Screen Display
BLACK SCREEN