Instruction manual

E-13
Inverted Labeling for Ceiling Mount
• When ceiling mounting the projector, attach the supplied inverted label as shown.
ON/OFF
POWER
LAMP
TEMP.
ON/OFF
POWER
LAMP
TEMP.
ON/OFF
POWER
LAMP
TEMP.
➡
Front
Example of a ceiling-mount setup
Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to
obtain the manufacturer recommended ceiling mount bracket (sold separately). (AN-XGCM20 Ceiling Mount
Bracket, AN-EP101AP Extension Tube).
• If the relative positions of the projector and the screen are not properly adjusted, the picture will be distorted.
MENU ENTER LENS E-ZOOM MUTE VOLUME
INPUT
SELECT
MN LN E-Z
IN
ADJ.
EN
90˚
SIDE VIEW
TOP VIEW
Lens center
Lens center
Example of a high-mount setup
• A high-mount setup makes projection from an elevated location possible, without ceiling modifications.
Lens center
©
Lens center
SIDE VIEW
TOP VIEW
Terminal Cover
• When the projector is ceiling mounted, attach the terminal cover
(supplied) to hide the connecting cables.
• Use the terminal cover to hide the connecting cables when the
projector is used on a desktop or high mounted.
ON
OFF
ON
OFF
➡