User`s manual

Extron • System 4
xixi
xixi
xi Switcher Series • User’s Manual • P/N 68-409-02 Rev. C
Configuration and ConnectionsSharp Installation
Page 3
6. Plug the 15-pin HD connector of the Projector Communications Extension cable
into the PJ Comm port on the System 4xi. The other end of the cable has a 9-pin
female connector. Plug this end into the 9-pin male D connector on the
Universal Comm adapter.
______ Secure all of the connector screws.
7. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) BNC-4 or
5 cable onto the System 4xi output and those on the other end into the
Computer RGB Input port (Input 2) of the projector.
System 4
xixi
xixi
xi Series – Sharp XG Series Projector Connections (RS-232 control)
Use the illustration below as a guide when connecting the System 4xi to a Sharp
Series projector. Refer to Sharp documentation to continue the installation.
________ When RS-232 control of the projector is used, the projector’s IR remote can be
used. However, because the projector’s IR remote does not communicate with
the System 4xi switcher, the projector and switcher can become out-of-sync if
the projector’s IR remote is used to change the projector’s input, picture mute or
power settings. Should this occur, press the power, mute or channel buttons on
the switcher to allow the projector and switcher to resynchronize.
____________ In a rack mount, do NOT allow the weight of the cables to be supported by the
System 4 xi . See page 2-5 for cabling guidelines.
WIRED
REMOTE
COMPUTER
AUDIO IN
FOR PC98MOUSE
PC CONTROL
INPUT 1 OUTPUT
COMPUTER RGB AUDIO OUTPUT
LR
R G BH V
INPUT 2
DC5V OUTPUT
-
MAX CURRENT 1A
+
VIDEO INPUT AUDIO INPUT
VIDEO OUTPUT
S-VIDEO
VIDEO
LR
FILTER
ON
OFF
RGBHV 5 BNC
9-Pin Female
Universal
CommAdapter
26-467-01
15-Pin
Male
9-Pin Male
OUTPUT
PJ COMM
RS 232
AUDIO AUDIO AUDIO AUDIO AUDIO
H/HV
R/C G/Y BR/C G/Y B
V
INPUT 4
H/HV V
R/C G/Y B
INPUT 3
H/HV V
R/C G/Y B
INPUT 2
H/HV V
R/C G/Y B
INPUT 1
H/HV V