Owner's Manual

Easy to Use Functions
-73
Setting up a Password
Entering the Password
Select “Password” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
1 Press
''
''
' or
""
""
" to select the de-
sired number and then press
||
||
|.
2 Enter the 3 remaining digits
and press
.
3 Enter the password again in
“Reconfirm” and press
.
Note
• When a password is set, you need
to enter the password to change “PRJ
Mode”, “Keylock Level”, “RS-232C”,
“Anti-Theft” and “All Reset” settings.
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page 71) is more effective.
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
Select “RS-232C” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
• When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.
•
Make sure that both the projector and computer
are set for the same baud rate. Refer to the
computer’s operation manual for instructions
for setting the computer’s baud rate.