Operating instructions
-43
Useful Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.
• This operation can also be performed by using the buttons on the projector.
MENU button
MOUSE/Adjustment
buttons ('/"/\/|)
RETURN button
ENTER
button
• Press RETURN to
return to previous
screen when the
menu is displayed
Adjustment
buttons ('/"/\/|)
MENU button
ENTER button
RETURN button
Example: “Picture” screen menu
1 Press MENU.
• The “Picture” menu screen for the se-
lected input mode is displayed.
2 Press
||
||
| or
\\
\\
\ and select “Pic-
ture” to adjust.
Menu item
Picture Mode
Contrast 0
0
0
0
Bright
Color
Tint
0Sharp
Standard
7500K
3D Progressive
Auto
Off
Off
Off
SEL./ADJ.
RETURN
ENTER
END
Picture SIG SCR PRJ Net.
0
0
Red
Blue
CLR Temp
Progressive
Film Mode
DNR
MNR
Eco+Quiet Mode
Reset
Downloaded From projector-manual.com Sharp Manuals
-45
Useful Features
Menu operation
Page 43
11
11
1
Selecting the Picture Mode
Picture Adjustment (“Picture” menu)
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture”
menu to your preference. Any changes you make
are retained in memory.
Note
• You can also press PICTURE MODE on the
remote control to select the picture mode. (See
page 36.)
• *sRGB is an international standard of color re-
production regulated by the IEC (International
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the images
are displayed in a natural tint based on an origi-
nal image, when “sRGB” is selected.
For additional information about the sRGB func-
tion, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue” and
“CLR Temp”, when “sRGB” is selected.
¥ When ÒsRGBÓ is selected, the projected image may be-
come dark, but this does not indicate a malfunction.
Info
Description
For standard image
Brightens portions of
image for more enhanced
presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduc-
tion of images from a
computer.
Selectable items
Standard
Presentation
Movie
Game
*sRGB
22
22
2
Adjusting the Image
*1
Not adjustable/selectable in the RGB input mode.
*2
Not adjustable/selectable when selecting “sRGB”
in “Picture Mode”.
Note
• “Red” and “Blue” cannot be set when selecting
“sRGB” in “Picture Mode”.
• To reset all adjustment items, select “Reset” and
press ENTER.
Adjustment items
button
\\
\\
\
button
||
||
|
Contrast
Bright
Color
*1
Tint
*1
Sharp
*1
Red
*2
Blue
*2
For less contrast.
For less brightness.
For less color
intensity.
For making skin
tones purplish.
For less sharpness.
For weaker red.
For weaker blue.
For more contrast.
For more brightness.
For more color
intensity.
For making skin
tones greenish.
For more sharpness.
For stronger red.
For stronger blue.
Contrast 0
0
0
0
Bright
Color
Tint
0Sharp
Standard
7500K
3D Progressive
Auto
Off
Off
Off
SEL./ADJ.
RETURN
ENTER
END
0
0
Red
Blue
CLR Temp
Progressive
Film Mode
DNR
MNR
Eco+Quiet Mode
Reset
Picture Mode
Picture SIG SCR PRJ Net.
1
3
4
5
6
2
7
8
The default
settings of
CLR Temp
7500K
7500K
6500K
7500K
–
33
33
3
Adjusting the Color Temperature
Note
• Values on “CLR Temp” are only for general stan-
dard purposes.
• “CLR Temp” cannot be set when selecting
“sRGB” in “Picture Mode”.
Selectable items
5500K
6500K
7500K
8500K
9300K
10500K
Description
For lower color temperature for warmer,
reddish incandescent-like images.
For higher color temperature for cooler,
bluish, fluorescent-like images.
Downloaded From projector-manual.com Sharp Manuals
-55
Useful Features
22
22
2
DHCP Client Setting
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Select “On” for “DHCP Client”. “Obtaining IP
Address...” appears, then the menu screen appears.
Confirm the parameters of IP Address, Subnet Mask
and Gateway on the TCP/IP screen.
If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the item
3 .)
33
33
3
TCP/IP Setting
Set the TCP/IP manually.
1 Select “Off” for “DHCP Client”, then
press ENTER .
2 Select “TCP/IP”, then press ENTER .
3 Enter “IP Address” using
''
''
',
""
""
",
||
||
|
and \, then press ENTER .
4 Enter “Subnet Mask” using
''
''
',
""
""
",
||
||
| and \, then press ENTER .
5 Enter “Gateway” using
''
''
',
""
""
",
||
||
| and
\, then press ENTER .
Selectable items
On
Off
Description
Obtains configuration parameters for
TCP/IP network automatically.
Sets the TCP/IP manually.
Setting the TCP/IP
Subnet Mask
IP Address
Gateway
1
55 .2
92 .
000 .
1
55 .2
68 .
000 .
1
55 .2
50 .
000 .
0
000
02
000
Network
Menu operation
Page 43
Selectable items
IP Address
Subnet Mask
Gateway
Description
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as
that of the computer and equipment on
the network.
Factory default setting: 000. 000. 000.
000
* When not in use, set to “000. 000.
000. 000”.
Note
• Confirm the existing network’s segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If “192.168.150.002”
is not used in a network with an IP address of
“192.168.150.XXX”, you don’t have to change
the projector IP address.
• For details about each setting, consult your
network administrator.
44
44
4 Confirming the
Projector Information
You can confirm the MAC address and projector
name.
Displayed items
MAC Address
Projector
Description
The MAC address of the projector is
displayed.
The projector name is displayed.
Note
• For information on how to change the projector
name, see “SETUP MANUAL” contained in the
supplied CD-ROM.
Downloaded From projector-manual.com Sharp Manuals