Instruction manual



2. Open the battery cover next to the paper roll cradle.

3. Install three new LR6 (“AA” size) batteries.

NOTE

 Besurethatthepositive(+)andnegative(-)polesof

eachbatteryarefacingintheproperdirectionfor

installation.

4. Confirm the no battery symbol “ ” lights off.

5. Close the battery cover.

6. Replace the printer cover.

Be careful with the paper cutter, so as not to cut yourself.

 

For the printer, you must install the paper roll provided with the register, even when you program the

1. Remove the printer cover.

 



2. Open the paper guide.

Set a paper roll in the paper roll cradle.

3. Insert the paper straight into the paper inlet, and press

The paper then feeds through and appears in the print area.

4. Close the paper guide.