Instruction manual

XE-A207 Frequently Asked QuestionsPage 5 of 31
Note: Before placing a new paper roll in the paper roll cradle, cut off the pasted
(taped) part of the paper and confirm that the cut end of the paper is straight.
4. Feed the end of the paper along with the paper position guides as shown in the
diagram below.
5. While holding down the paper, slowly close the print roller arm.
6. Cut off the excess paper using the edge of the inner cover, and replace the
external printer cover. Press the RECEIPT key to make sure the paper end
comes out of the printer cover and clean paper appears.
Note: If the paper end does not come out. Open the printer cover, and pass the
paper end between the paper cutter and the paper guide of the printer cover,
and replace the cover.