Instruction manual

XE-A207 Frequently Asked QuestionsPage 31 of 31
To produce a period Z report, do the following:
7. In the Register (REG) mode; press the MODE key
8. You will see the SELECT MODE screen
9. Press the  key to until you see 5 X2/Z2 MODE highlighted
10. Press the  key to scroll to and highlight 2 RESETTING
11. Press the TL/NS key to select the Z2 RESETTING mode
12. Press TL/NS
Your GENERAL period Z report will print
This list of Frequently Asked Questions is not intended to replace the XEA207
instruction manual. It does not list all the functions and features of the XEA207.
Please refer to the XEA207 instruction manual for more guidance on functions
and programming steps not covered in these “Frequently Asked Questions.