Instruction manual

XE-A207 Frequently Asked QuestionsPage 3 of 31
How to install the batteries, and why should I do so?
The XEA207 uses 2 x AA size batteries to hold its preset, and sales data in memory
when it is switched off. If you do not install 2 x AA size batteries; the XEA207 will
be cleared of all preset, and sales data when it is turned off.
1. Be sure the register is plugged in.
2. Lift the printer cover up and forward, and detach it. Be careful of the paper
cutter to avoid cutting yourself.
3. Open the battery compartment cover next to the paper roll cradle.
4. Install 2 alkaline AA size batteries. When the batteries are properly installed
the “No Battery” message on the display will disappear.
5. Close the battery compartment cover.
Please see the question on how to replace the batteries for details on when and how to
replace the batteries. If the unit is not used for some months, you might not get any
warning when you turn if on that the batteries have failed. In this instance the
XEA207 will initialise itself.