Instruction manual

XE-A207 Frequently Asked QuestionsPage 27 of 31
How shall I know when it is time to replace the batteries?
The XEA207 will display a low battery warning message “LOW BATTERY”
when the batteries are near to the end of their life. It will display the warning
message “NO BATTERY” when the batteries are past the end of their life, or are
not installed.
The “LOW BATTERY” warning message is normally displayed near the end of
the batteries’ life. You should arrange to the replace the batteries within a couple
of days of the “LOW BATTERY” message first appearing to reduce the chance of
losing programming and sales data from your XEA207.
If you see “NO BATTERY” displayed it is important that you do not turn the
XEA207 off until you have replaced the batteries. If you do turn it off before you
have replaced the batteries; you will loose all your programming and sales data.
To replace the batteries, do the following.
1. Make sure the XEA207 is plugged in.
2. Remove the printer cover.
3. Open the battery compartment cover next to the paper roll cradle, and remove
the old batteries.
4. Install three (2) new alkaline batteries (AA size), in the battery compartment.
Be sure the positive and negative poles of each battery are facing in the correct
direction. When they are installed correctly, the low battery or no battery
message will disappear.
5. Close the battery compartment cover.
6. Replace the printer cover.