Specifications

20
Printing Format
You can set the printing format of the receipt or journal to print in various ways. Set the mode
switch to the Z/PGM position and use the following sequence:
2 ➝ S ➝ ABCDEFGH ➝ S ( ➝ S)
Parameter A: Choice of printing manual VAT amount, automatic VAT amount or
automatic tax amount
Value to enter: 0 for manual VAT, 1 for automatic VAT or 2 for automatic tax
Meaning: When automatic VAT is selected, the VAT amount is always printed at the
end of the transaction. When manual VAT is selected, the VAT amount is
printed only when the S key is pressed followed by u. When auto-
matic tax is selected, the tax amount is always printed at the end of the
transaction.
Parameter B: Choice of printing receipt/journal in the REG mode
Value to enter: 0 for printing or 1 for not printing
Parameter C: Choice of receipt or journal format
Value to enter: 0 for journal format or 1 for receipt format
(In the receipt format, blank lines are inserted between transaction printing.)
Parameter D: Choice of printing date or not
Value to enter: 0 for printing or 1 for not printing
Parameter E: Choice of printing time or not
Value to enter: 0 for printing or 1 for not printing
Parameter F: Choice of printing receipt numbers or not
Value to enter: 0 for printing or 1 for not printing
Parameter G: Choice of printing taxable subtotal
Value to enter: 0 for printing or 1 for not printing
Parameter H Choice of printing subtotal with S
Value to enter: 0 for printing or 1 for not printing
Example: Set the format for printing manual VAT amount (0), printing receipt (0) in the journal
format (0) and printing date (0), time (0), receipt number (0) and taxable subtotal (0),
and not printing of subtotal with the S key (1). (These are the factory default
settings.)
2S (0000000)1 S(S)
A B C D E F G H
DD
DD
D
• When entering parameters A to G, any leading zeros in the sequence can be omit-
ted. For example, if A=0, B=0, C=0, D=0, E=0, F=0, G=1, H=1, you can input 11.
• You can continue programming without printing the programming report by not
pressing the S key at the end of the program.