User manual

Sharp XEA107 Electronic Cash Register: Frequently Asked Questions Page 8 of 17
How do I set a 10% GST rate?
1. Set the mode key to the Z/PGM position
2. To set the Tax system to “Auto VAT 1 – 4” (this is the system used for GST). Enter
the following:
-8 #/ST -1 #/ST
3. To set the tax rate to 10%. Enter the following:
-9 #/ST -1 /TM -1 -0 -0 -0 -0 -0 #/ST
4. Press #/ST twice. A programming report will print.
How do I set a Department as Taxable or Not Taxable?
1. Set the mode key to the Z/PGM position
2. To set a department as “not taxable”, enter the following:
-7 /TM -DEPT KEY-
3. Repeat if required for other departments, press SHIFT before the department key
when setting departments 5 to 8.
4. To Set a department as “taxable”, enter the following:
-1 -7 /TM -DEPT KEY-
5. Repeat if required for other departments, press SHIFT before the department key
when setting departments 5 to 8.
6. Press #/ST again. A programming report will print.