User manual

Sharp XEA107 Electronic Cash Register: Frequently Asked Questions Page 6 of 17
4. If you wish to use the paper take up spool please do the following
1. Remove the paper holding plate from the spool.
2. Insert the end of the paper into the slit in the spool.
(Press the  key to feed more paper if required.)
3. Wind the paper two or three turns around the spool shaft.
4. Mount the paper holding plate onto the take-up spool.
5. Set the spool on the bearing, and press the  key to take
slack in the paper.
5. Replace the printer cover; be careful with the paper cutter, so as not to cut yourself.