User manual

Sharp XEA107 Electronic Cash Register: Frequently Asked Questions Page 5 of 17
What sort of paper roll do I use, and how do I install it?
The XEA107 uses a bond paper roll which is: 57mm wide. Its maximum diameter should be no
more that 80mm. The weight of the paper should be between: 47 to 64g/m
2
.
1. Pull the printer cover forward and detach it. The paper cutter is mounted on the printer
cover, be careful not to cut yourself.
2. Set the paper roll in the paper roll cradle as shown in the diagram below.
3. Insert the paper straight into the paper inlet, and press the  key. The paper should then
feed through and appear in the print area.