User guide

Entering Characters 47
Using Stroke Mode
The following is an example of entering “ ”.
1. Change the input mode to T9
Stroke mode.
2. Press I G J to display
the corresponding stroke for
“”.
3. Long press the corresponding key to complete the
selection (in this case M).
Selecting the Character to Input
1. Perform steps 1 and 2 in “Using BoPoMoFo Input
Mode” on page 45 or “Using Stroke Mode”.
2. Press b to highlight the Chinese character.
3. Press c or d to select the character you wish to
input and press B.
You can also enter the desired Chinese character by
pressing the candidate number directly using the
keypad.
Entering Pictograms and Symbols
1. On the text entry screen, press [Options] and select
“Add Symbol”.
When “Input Language” is set to “English”, the half
width symbols screen is displayed first.
When set to “Traditional Chinese” or “Simplified
Chinese”, the full width symbols screen is displayed
first.
To switch the symbols screen, press A.
To switch to the pictogram history screen, press C.
To switch the displayed pictogram list on the
pictogram input screen, press A.
2. Select the pictogram or symbol you wish to use and
press B.
Note
• Pictograms are only available for SMS/MMS
messages and Text Template.