Specifications

Step 4
Step 3
Step 2
REMOVE iPod FROM THE BUILT-IN iPod DOCKING
Step 6
Step 7
Step 8
To take out the iPod from the docking station, user can first detach the front panel, and repeat step
1 to step 8 to take out the iPod & return the iPod docking inside the unit’s cabinent.
Step 5
Pull out the iPod docking as shown below.
Once the iPod unit is remove, push the
stick backward into the iPod docking
Once the stick with the
Push on the iPod holders on both sides
until they stop.
Push the docking back
to Cabinent
Push the iPod docking inwards into the
unit’s cabinent until a click sound is heard.
Step 1
Press the button as indicated below to
unlock the iPod docking.
Press down
connected iPod is completely
out, user should push on
the locking buttons
on the both sides
of the iPod
connector to
release the
iPod as
indicated in the
picture, and remove the iPod unit.
Press toward this
lock switch
Pull out
Never pull out this stick unless docking is
completely release out.
Push inwards
station until it stops.
Press down this button
Press towards the iPod unit to hold the
iPod unit firmly in place
Pull out the iPod connected as indicated
below by pulling out the stick.
Pull out this stick
9
Press on this button on the left side
as indicated below to
unlock the iPod holder.