Specifications

GOLDCUP CONTROLS SERIES 200
PARTS LIST
For Figure 2A - Cylinder control
ITEM DESCRIPTION PART NO. QTY. QTY.
PUMP MTR.
1 Servo shaft assy. S13-48438 1 1
2 Screw, hwhd. 3/8-16 x 1-1/4 353-25018 4 4
3 Washer Nyltite #37 631-45007 4 4
4 Ring, WT 5100-50 356-65070 1 1
5 O-ring, 70 S-1 ARP 013 671-00013 1 1
6 Washer, hardened 350-10141 1 1
7 O-ring, 70 S-1 ARP 017 671-00017 2 2
8 Shear seal 033-71371 1 1
9 Needle bearing 230-82141 1 1
10 Control cover 033-91154 1 1
11 Thrust washer 350-10064 1 1
12 Hex flush plug 1/8” pipe 431-90204 1 1
13 Nut 333-67000 2 2
14 NOT USED
15 Spool, 2.6” (66.0 mm) lg. 033-70844 - 1
16 Spring 033-72181 1 1
17 O-ring, 90 S-1 ARP 906 691-00906 2 2
18 Plug 033-91889 2 2
19 Soc. setscrew. 311-50002 2 2
20 Nut, cover 033-91890 2 2
21 O-ring 691-00905 2 2
22 Spool, 2.26” (57.4 mm) lg. 033-70845 2 1
23 Spring pin 325-12120 2 2
24 Finger spring 350-10067 2 2
25 Shear seal 033-70525 1 1
26 Control cover gasket 033-91058 1 1
12