Instruction manual

8
w w w . f i r e s a f e t y u s a . c o m
9
8 7 7 . 6 9 9 . 3 4 7 3
SMALL RIGHT ANGLE FLASHLIGHT
RETRACTOR KIT
• Nylon coated stainless steel cable
• Stainless steel spring and hardware
• 60 lb. breaking strength
• 400 degrees, V2 rating Nylon line with Kevlar Core
• 20” Extension
• 12 oz. retraction force is ideal for smaller 4AA ashlights
RT2-4322: $27.00
SLIDE RELEASE CLIP WITH
ACCESSORY
Fastest way to attach your ashlight, PAL,
gloves, or SCBA mask
Stainless steel stud
AC0-1003: $10.50
STAINLESS STEEL SNAP CLIP
Fastest way to attach your ashlight, PAL,
gloves, or SCBA mask
Stainless steel stud
AC0-1004: $11.50
GLOVE HOLDER
Fast way to attach your ashlight
Stainless steel stud
AC0-1006: $12.50
LARGE RIGHT ANGLE
FLASHLIGHT RETRACTOR
& STABLIZER KIT
• Nylon line with Kevlar Core 80 lb. breaking strength
• Stainless steel spring and hardware 32” Extension
• 24 oz. retraction force is optimum for larger right-angle
ashlights
RT3-4323: $32.50
MINI HIGH FORCE FLASHLIGHT
KEEPER, ROTATING BELT CLIP
MOUNT
• Allows light to rotate 360 degrees
• Clips over belt, pants or strap
• Nylon coated stainless steel cable
• 60 lb. breaking strength
• 20” Extension
• Stainless steel spring and hardware
• 12 oz. retraction force is ideal for smaller ashlights
RT2-0052: $19.95
STAINLESS STEEL SPLIT RING
• Fastest way to attach your ashlight, PAL, gloves, or
SCBA mask
• Stainless steel stud
AC0-1002: $8.50
DRYGUY GEAR TREE
Dries your boots, pants, jacket,
gloves, & helmet simultaneously
The ultra powerful high volume,
whisper quiet rotary blower
provides a blast of heated or
non-heated air for super fast drying
Dries in approximately three hrs
Controls: On/Off/3-HR Timer
GT: $230.00
Gear Accessories
DRYGUY BOOT AND
GLOVE DRYER
Holds two boots and two gloves at once!
Choose heated or unheated air for super
fast drying
Drys gloves and boots in approximately
one hour
Comes with 7ft power cord
S16DG1: $79.95
HANGAIR DRYING HANGER
The HangAir will dry your turnout gear in hours. This gives you the op-
portunity of several uses of a dry suit throughout the day. The secret is a high-
powered waterproof fan which pushes 120 cubic feet of dry air per minute
through your suit as it hangs on a wide shoulder hanger. An added benet
is that the quick drying process retards the development of bad odors. The
HangAir is molded from an incredibly tough plastic resin and the steel hook
which will support up to 100 pounds. Safe, low voltage power is supplied to
the hanger fan through a 15-foot cord attached to a universal power 100-240
VAC wall adapter. When not in use, the cord can be stowed underneath the
wing of the HangAir. 15-foot power cord, Low-voltage 12v fan, 120 CFM high-
power fan, Tough, non-corroding resin and steel construction .
HANGAIR: $35.00
WALL MOUNTED RED RACK GEAR STORAGE
- Dimensions: 20” wide x 20” deep x 72” tall x length specied
- The open air design of Red Rack provides for FREE AIR CIRCULATION
- Red Rack components are coated with a durable red powder coat nish
- All systems include:
Adjustable boot and helmet shelves, apparel hooks and label holder.
RRWM-1/20: 1 Compartment System: $285.00
RRWM-2/20: 2 Compartment System: $450.00
RRWM-3/20: 3 Compartment System: $625.00
RRWM-4/20: 4 Compartment System: $825.00
RRWM-5/20: 5 Compartment System: $995.00
RRWM-6/20: 6 Compartment System: $1,175.00
RRWM-7/20: 7 Compartment System: $1,350.00
RRWM-8/20: 8 Compartment System: $1,550.00
RRWM-9/20: 9 Compartment System: $1,725.00
RRWM-10/20: 10 Compartment System: $1,875.00
RRWM-11/20: 11 Compartment System: $2,075.00
RRWM-12/20: 12 Compartment System: $2,250.00
RRWM-13/20: 13 Compartment System: $2,425.00
RRWM-14/20: 14 Compartment System: $2,595.00
RRWM-15/20: 15 Compartment System: $2,795.00
SINGLE SIDED MOBILE RED RACK GEAR STORAGE
- Dimensions: 64” wide x 20” deep x 79” tall
- Single sided red rack with three openings
- Units are supplied with four swivel casters
- Includes two foot operated brakes
- All systems include:
Adjustable boot and helmet shelves, apparel hooks and label holder.
RMSS-3/20: Single Sided Moble Rack: $750.00
RMSS-3/24: Single Sided Moble Rack: $800.00
DOUBLE SIDED MOBILE RED RACK GEAR STORAGE
- Dimensions: 64” wide x 40” deep x 79” tall
- Double sided red rack with three openings each side
- Units are supplied with four swivel casters
- Includes two foot operated brakes
- All systems include:
Adjustable boot and helmet shelves, apparel hooks and label holder.
RMDS-6/20: Double Sided Mobile Rack: $1,195.00
RMDS-6/24: Double Sided Mobile Rack: $1,250.00
SINGLE SIDED AND DOUBLE SIDED MOBILE
CHROME WIRE GEAR STORAGE
- Single Sided: Dimensions: 72” wide x 21” deep x 79” tall
- Double Sided: Dimensions: 72” wide x 36” deep x 79” tall
- Single sided wire racks
- Units are supplied with four swivel casters
- Includes two foot operated brakes
- All systems include:
Two levels of open wire shelving, full length grid dividers,
apparel hooks and label holder.
MSS-3: Three Section Wire Rack: [24” per section] $725.00
MSS-4: Four Section Wire Rack: [18” per section] $775.00
MSS-5: Five Section Wire Rack: [14” per section] $825.00
MSS-6: Six Section Wire Rack: [12” per section] $895.00
MDS-6: Six Section Wire Rack: [24” per section] $1,025.00
MDS-8: Eight Section Wire Rack: [18” per section] $1,125.00
MDS-10: Ten Section Wire Rack: [14” per section] $1,250.00
MDS-12: Twelve Section Wire Rack: [12” per section] $1,375.00
Ready Rack
DRY KWIK ACCESSORIES:
Open loop coat hanger DKH-O: $8.00
Closed loop coat hanger DKH-C: $8.00
Flat coat and pant hanger FDH: $8.00
Glove or hood hanger GDH: $8.00
Helmet Holder HH: $8.00
Utility Hooks BPH: $3.00
MIC RETRACTOR GEAR KEEPER
The Mic Keeper offers full 20” quick and easy access
to your mic
• This unique device mounts to your mic tab or radio
pocket with a pin screw
RT2-4022: $21.95
NEW!
NEW!
NEW!