Manual

ManualFocus
Auto Focus may not be able to focus on the
subject in the situations shown below. In such
situations, set the camcorder to Manual Focus
mode and focus manually.
Subject is too dark.
Fast-moving subject.
Subject has horizontal stripes.
Light reflects off the subject.
Subject has fine, re )eated
patterns.
Fast-speed shutter being used
under fluorescent lighting.
Lack of contrast, e.g. snow
scene.
Background is too bright.
Subject is being shot through a
dirty or wet window.
Two su_ts at different distances
overlap inthe same scene.
Subjects at different distances
appear in the center of the scene
at the same time.
1
2
3
4
Set the camcorder to TAPE-CAMERA or
CARD-CAMERA mode.
Press the AUTO ON/OFF button to
select Manual mode.
Press the MENU/DISPLAY button until
the menu screen appears.
Select a, then press m,_ on the
Operation button. Select "MAN. FOCUS"
(_), then press _ (_).
5
6
Press _ to display the focus setting
screen.
MANUAL
12bit
.FOCUS
&FAR
TNEAR
SP
SET [_ BUTTON]
Adjust the Power Zoom
control to frame the
subject as you desire.
47