Service manual

8
VL-WD250U
VL-WD450U
6.
10.
1) Remove the screw ((a)LX-BZ0221TAFC)(1 pc.) to remove
the cassette lid.
7.
1) Disconnect the B TO B connector of the DV main FPC,
disconnect the front and rear FPC connectors, and remove the
screws ((c)XiPSF17P04000)(2 pcs.) to remove the main PWB.
12.
11.
9.
1) Remove the screws ((b)LX-HZ0063TAFF)(2 pcs.) to remove
the speaker cover.
2) Disconnect the connector of the speaker to remove the speaker.
3) Remove the screws ((d)XiPSN17P04000)(2 pcs.) and the screw
((c)XiPSF17P04000)(1 pc.), and remove the DV terminal PWB
together with the stay front ass'y.
1) The shaft (` section) of the LCD tilt unit is rotated in the arrow
direction 90°.
2) Turn the LCD tilt unit so as to verticalize it to the LCD cabinet.
3) Remove the fixing screws ((c)XiPSF17P04000)(2 pcs.) and
((d)XiPSN17P04000)(3 pcs.).
1) Remove the screws ((l)LX-HZ0017TAFF)(2 pcs.) to remove
the LCD ass'y.
(l)
(l)
(a)
(c)
(d)
(d)
(b)
(c)
(c)
1) Remove the screws ((b)LX-HZ0063TAFF)(3 pcs.) to remove
the zoom switch unit and AV terminal.
1) Remove the screws ((b)LX-HZ0063TAFF)(5 pcs.), and re-
move the mechanism together with the mechanism PWB
fitting angle.
8.
(b)
(b)
(b)
(b)
(d)
(c)
(d)
(d)
(c)
(`)
(`)