Manual

4 Press V or Z_to select"ON", then press
the SET button.
The remote control (RRMCGOO84TASA)is not
supplied with this camcorder. Contact the
nearest SHARP service center or your dealer
for purchasing as a specified part.
Installing the Batteries
1 Open the battery compartment cover.
Insert the two commercially available AA
(R6 or UM/SUM-3) batteries with the
battery poles positioned as indicated.
1 2
Place the cover.
Activating
1 In VCR mode, press the MENU button
until the menu screen appears.
2 Press _For Z_,on the operation button
to select F[C, then press the SET button.
3 Press _For /,, to select"REMOTE",
then press the SET button.
5 Press the MENU button to turn off the
menu screen.
Operating
Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
15°
0
REW button
REC START/STOP button
_l_ 'ZOOM buttons (W/T)
FFF button
,,=_ ,_T_,-_L_WI Dr- skOwbutton
•,_ _il _
PLAY button
-- STOP button
VOLUME /÷ buttons
PAUSEJSTILL button
Notes:
• Do not use old and new batteries together or
batteries of different brands together.
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
iiiiiiiiiiiiiiiiiiiiiiii iiiiiii!iii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiL
34