Manual

Tile LCD monitor screen functions as a handy
playback monitor. Nothing needs to be
connected, allowing instant on-screen play-
back with the sound through tile built-in
speaker.
Power switch
Operation button
Hold down the Lock button
and set the Power switch to
VCR.
Lock button
2
3
Press < (or _---)on the Operation button
to rewind (or fast forward) the tape to the
desired point.
Press /,, to begin playback.
Note:
• If you press the REC START/STOP button in VCR
mode, the "_" mark appears and the
camcorder enters Recording Standby mode• If
you do not intend to record, press '.,.'to turn the
"@" mark off, then press ,'.,to begin playback•
This will ensure your previous recording is not
erased (see page 44)•
To stop playback
Press ,_.'.
To turn the power off
Set the Power switch to OFF without pressing
the Lock button.
Note:
• The tape is automatically rewound when
playback reaches the end of the tape.
When the camcorder is in VCR mode, push the
Volume control to the + or side to increase
('1) or decrease (_) the volume.
The volume level indicator will appear on the
LCD screen during adjustment only. Once the
Volume control is released the volume level
indicator will disappear shortl afterwards.
Volume control
IIIIIIIIRnnn VOLUME
Decrease _ Increase
Speaker
19