Manual

Preparation
Example: Setting the date to June 2, 2003
(JUN. 2. 2003) and the time to 10:30 am
(10:30 AM).
Powerswith
I
SET button
MENU button
Operation button
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 11).
1 Hold down the Lock button
and set the Power switch to
CAMERA.
Lock button
2 Press the MENU button until the menu
screen appears.
4 Press V or Z_to select"JUN"(month),
then press the SET button.
5 Press _y or Z_,to select "2" (day), then
press the SET button.
6 Press V or _ to select "2003" (year),
then press the SET button.
7 Press V or Z_to select"10 AM"(hour),
then press the SET button.
8 Press V or _ to select "30" (minute),
then press the SET button.
• The internal clock now starts operating.
9 Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the SETTING
1 screen (6) appears in step 2. Select
"SETTING" in the CLOCK SET screen (CE)) using
the Operation button and SET button.
3 Press the SET button.
13