Service manual

31
VL-NZ50S/H/E/W/NZ80H
VL-NZ100S/H/E
(6) Input the necessary information for the application.
For the indispensable input items, be sure to input them.
Select the [Group/company] and [Kind name] from the list.
Input the [Model name].
Input the [Serial number].
Input the [Site/department of repair].
2. Print the application result.
(1) Print out the application result screen.
Control the application result as evidence.
To print it, select "Print (P)" from the "File (F)" in the menu bar or click on the print button in the tool bar.
(2) Click on [Menu] to complete the application.
If you create applications in succession, repeat steps (1)~(8).
To complete it, click on [End] in the menu screen.
(7) Click on [motion].
The confirmation screen will appear.
(8) Click on [Yes].
Click
(5) Click on [Repair use].
MODEL ID SETTING
Address VCR ADJ FD, FE, FF Mode VCR STOP mode
Procedure 1) Set the unit to the VCR adjustment mode with command 12.
2) Give E
2
PROM write enable with command 20.
3) Assign a MODEL ID to each address.
Examples • During E
2
PROM (IC705) replacement.
Address FDh FEh FFh Model
Data 10 20 2C NZ50S
2D NZ50H
2E NZ50E/W
30 NZ80H
28 NZ100S
29 NZ100H
2A NZ100E