User Manual

iv
E
Card Recording
Lock button
6 Press the STILL button to record a still
image of the subject.
5 Press the Power Zoom buttons to frame
the subject as you desire.
AUTO
NORMAL
CARD
1/23
RECORD I NG TO
MEMORY CARD
Card Playback
1
Make sure that the recorded card is
inserted.
2 Open the LCD monitor and adjust the
angle.
3 Set the Media Selection
switch to CARD.
5 If the image you want to play back does
not appear, touch [H] or [J] to scroll
through the thumbnail images.
6 Touch the desired image to select, and
then touch the image again to set.
• To set the image enclosed by the
selection frame, you only need to touch
the image once.
• The selected image is displayed in full-
screen.
Power Zoom buttons
STILL button
Media Selection switch
POWER switch
1 Make sure that a card is inserted.
2 Remove the lens cap. Pull out the
viewfinder completely or open the LCD
monitor.
3 Set the Media Selection
switch to CARD.
4 Hold down the Lock
button and set the
POWER switch to
CAMERA.
4 Hold down the Lock
button and set the
POWER switch to VCR.
Lock button
PLAYBACK
NORMA L
PAGE 1 / 2
PR I NTPRO - DEL
TECT
ORD ER
100- 0006
654
321
PAGE 1 / 2
PR I NTDEL
ORD ER
100- 0003
65
32
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.