User Manual

Useful Features
Playback
Useful
Features
E
51
1 In TAPE-VCR, TAPE-CAMERA, or
DUAL-CAMERA mode, display the
menu screen (see page 31).
2 Touch [K] or [L] to select “R”, and
then touch [SET]. Touch [K] or [L] to
select “TIME CODE”, and then touch
[SET].
Using the Time Code
Available modes: TAPE-VCR, TAPE-CAMERA,
DUAL-CAMERA
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/25 sec.). This is automati-
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen to check the elapsed
time when playing back from tape or recording
on tape.
Display format
Frame number*
Second
Minute
Hour
4 Touch [RETURN] until the menu screen
turns off.
• The time code is displayed.
To turn off the time code
Select “DISP.OFF” and then touch [SET] in step
3 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a TV
during tape playback
*Displayed during still
or frame advance
playback.
Time code
REMOT E
TIME CODE
TC OUT
RETURN
SOUND
DISP. OFF
OTHERS
RE -
SET
TURN
DISP. ON
INDEX SRCH
DISP. ON
TIME CODE
RE -
TURN
3/3
AUDIO
TC0:05:35
DISP
I NDEX
AUD I O1
+
2
REMOT E
TIME CODE
TC OUT
RETURN
SOUND
OFF
OTHERS
RE -
SET
TURN
ON
INDEX SRCH
3 Touch [K] or [L] to select “ON”, and
then touch [SET].
4 Touch [RETURN] until the menu screen
turns off.
ON
TC OUT
0 00 10 20TC
3 Touch [K] or [L] to select “DISP.ON”,
and then touch [SET].
1 In TAPE-VCR mode, display the menu
screen (see page 31).
2 Touch [K] or [L] to select “R”, and
then touch [SET]. Touch [K] or [L] to
select “TC OUT”, and then touch [SET].