User Manual

Basic Operations
Playback
Basic
Operations
E
25
POWER switch
Media Selection switch
4 Hold down the Lock
button and set the
POWER switch to VCR.
• The camcorder turns on
in TAPE-VCR mode.
Tape Playback
Available mode: TAPE-VCR
The LCD monitor screen functions as a handy
playback monitor. Nothing needs to be
connected, allowing instant on-screen play-
back with the sound through the built-in
speaker.
To stop playback
Touch [b] (Stop).
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.
Note:
• The tape is automatically rewound when
playback reaches the end of the tape.
2 Open the LCD monitor and adjust the
angle.
Basic Operations
Playback
1/3
REW
DISP
60
min
PLAY/
STOP
ST I LL
FF
1/3 DISP
60 min
/
1/3
REW
DI
PLAY/
STOP
ST I LL
FF
5 Touch [REW] or [FF] to rewind or fast
forward the tape to the desired point.
6 Touch [PLAY/STILL] to begin playback.
• The indicators on the playback opera-
tion on-screen buttons change to
symbols after playback begins.
Lock button
Speaker
Watching the Playback in the
Viewfinder
You can also watch the playback in the
viewfinder by closing the LCD monitor with the
screen facing in.
3 Set the Media Selection
switch to TAPE.
1 Supply power to the camcorder, and
insert the recorded Mini DV cassette.
• To operate the playback functions, turn the
CONTROL dial to select the desired playback
operation indicator, and then press the dial.
• To turn off the playback operation indicators,
turn the CONTROL dial to select “DISP”, and
then press the dial. Press the CONTROL dial
again to turn them back on.
Note:
• You cannot monitor the sound through the
speaker when watching the playback in the
viewfinder.
CONTROL dial