User Manual

Preparation
18
E
2 . 1 . 2001
0:00
SETT I NG
2 . 6 . 2002
10 30
SETT I NG
:
DI SPLAY
SUMR T IME
SETT I NG
12H/ 24H
RETURN
24H
12H
AREA
CLOCK SE T
RE -SET
TURN
9 Touch [K] or [L] until the desired
number appears for the day, and then
touch [SET].
10 Repeat the same operations in step 9 to
set the month, year, hour, and minute.
• If you input the wrong number, touch
[RETURN] to reselect that number and
repeat the procedure.
• The internal clock starts operating after
you select the number for a minute and
touch [SET].
11 Touch [RETURN] until the menu screen
turns off.
Changing to the 12-hour Time Mode
1 After performing step 10 above, touch
[K] or [L] to select “12H/24H”, and then
touch [SET].
Notes:
• Providing the date and time have been internally
set, they will always be recorded on the tape or
card, and you can choose to display them or not
(see page 50).
• The menu screen automatically turns off if no
settings are made within 5 minutes.
• You can also adjust the clock in the CLOCK SET
menu in DUAL-CAMERA or CARD-CAMERA
mode.
12H
12H
/
24H
2 Touch [K] or [L] to select “12H”, and
then touch [SET].
3 Touch [RETURN] until the menu screen
turns off.
Indents
Using the Lens Cap
When attaching or removing the lens cap,
grasp the indents on both sides of the cap.
When recording, remove the lens cap and
attach the lens cap cord to the fastener so that
the cap will not get in the way.
Fastener
Note:
• Always replace the lens cap on the lens when
the camcorder is not in use.
DI SPLAY
SUMR T IME
SETT I NG
12H/ 24H
RETURN
1 . 1.2001
0:00
AREA
CLOCK SE T
RE -SET
TURN
8 Touch [K] or [L] to select “SETTING”,
and then touch [SET].