User Manual

Digital Still Camera
Features
Digital Still Camera Features
Playback
E
95
Dubbing Images from a Card
to a Tape
Available mode: CARD-VCR
Use the procedure below to select still images
recorded on a card and dub them to a tape.
1 Insert the recorded card and a Mini DV
cassette in the camcorder.
2 Set the camcorder to TAPE-VCR mode,
and then cue to the location on the tape
to be dubbed.
3 Set the camcorder to CARD-VCR mode.
6 Press the REC START/STOP button.
• The camcorder enters Recording
Standby mode.
4 If the image you want to dub does not
appear, touch [H] or [J] to scroll
through the thumbnail images.
5 Touch the desired image to select, and
then touch the image again to set.
• To set the image enclosed by the
selection frame, you only need to touch
the image once.
• The selected image is displayed in full-
screen.
7 Touch [REC] to begin dubbing the image
to the tape.
8 Touch [REC] again to stop dubbing.
9 Touch [CANCEL] to complete the
procedure.
• If you want to dub another image, touch
[H] or [J] to display the image, and
then repeat steps 6 to 8.
PLAYBACK
NORMA L
PAGE 1 / 1
PR I NTPRO - DEL
TECT
ORD ER
100- 0006
654
321
PLAYBACK
NORMA L
PAGE 1 / 1
PR I NTPRO - DEL
TECT
ORD ER
100- 0003
654
321
6 0 min 60 min
CAN-
CEL
REC
6 0 min 60 min
CAN-
CEL
REC
6 0 min 60 min
CAN-
CEL
REC
6 0 min 60 min
CAN-
CEL
REC
6 0 min 60 min
CAN-
CEL
REC