Specifications

Before Requesting Service
Before calling for service, please check the following troubleshooting table.
S)##ll&4ll
Possibfe ciwse ’ .
.
No power
Safety devices are functioning.
Set Power switch to OFF and remove
battery pack; wait for two seconds,
then re-install battery pack and turn
on power (p. 12).
Battery pack is not charged.
Power source is not properly con-
netted.
Charge battery pack sufficiently
(P. 11).
Connect power source properly
(pp. 12-14).
Power goes off soon
after coming on.
Depleted battery pack.
Dew in VIEWCAM.
Use a fully charged battery pack
(P. 11).
Wait until dew dries (p. 6).
Power on but no image
VIEWCAM is in VCR mode.
Set Power switch to CAMERA
on monitor.
(P. 20).
I
Cannot record.
Erasure protection hole is covered.
Slide red projection to open hole
(P. 8).
Poor colour
z
5
i5
8 :’
0: Fuzzy picture
Inappropriate picture adjustments
Adjust picture (p. 40).
Inappropriate scene setting (Scene
Press Scene Menu button to select
Menu) selected.
appropriate scene setting (p. 39).
I
Dust or other foreign matter on lens.
Clean lens.
Not properly focused.
Adjust focus manually or set VIEW-
CAM to Auto Focus mode (pp. 24,
I )
38 .
,
Monitor picture too dark.
“SPORT” selected for scene setting
Select “SCENE MENU” (Auto mode)
(Scene Menu).
for scene setting (p. 39).
No image appears on
Improperly connected to TV.
Reconnect properly (p. 45).
connected TV’s screen.
Video input channel on TV or TV
Select the video input channel or TV
I
channel is not selected properly.
channel properly (p. 45).
y Poor colour
8
Inappropriate picture adjustments
Adjust picture (p. 40).
g VEWCAM does not Play
Call for service.
2
Dirty video heads
back in colour on con-
nected TV.
Video noise in image.
Worn video heads
Call for service.
I
Old or worn tape
Use a new tape cassette (pp. 8, 15).
48 a
-