Specifications

Picture/Backlight
Adjustments
If the picture is difficult to see due to ambient
lighting, etc., adjust the monitor picture.
Power switch
MODE DISPLAY button
* button PICTURE button
I
EXIT button
SELECT button
Hold down the Lock
button and slide the
Power switch to
CAMERA or VCR.
Lot k button
Press the MENU button until “PICTURE”
appears.
Press the PICTURE button (m) to display
the adjustment screen. Then press the
SELECT button (w) until the item you
wish to adjust appears.
I
PIC-
TURE
4 Press the 7 or A button to adjust the
picture or backlight to your preference.
BACKLIGHT
NORMAL
Normal
+ 4
BACKLIGHT
BRIGHT
Bright
5 When you are finished, press the EXIT
button (m) to turn off the adjustment
screen.
Notes:
l In bright daylight, the monitor picture will be
easier to see if you set the backlight mode
(“BACKLIGHT”) to “BRIGHT”.
l The picture adjustments have been factory
preset to neutral settings, and the backlight
V
mode (“BACKLIGHT”) has been factory preset to
0
normal (“NORMAL”).
32
-
l When the colour is adjusted, the picture on the
screen may differ from the picture actually
f$
recorded. Do not change the colour setting OTcA
unless it is necessary.
Q?
5-m
(Om
_